188.000تومان
ماژول محافظ شارژ باتری لیتیومی 6 سل 12A
-درصورت نیاز به اطلاعات بیشتر و یا سفارش پروژه با شماره پشتیبانی سایت تماس حاصل نمایید. تلفن تماس 09124818264
-پس از خرید محصولات دانلودی و آموزشی به صفحه ی پروفایل قسمت دانلود ها مراجعه و فایلهای خود را دانلود کنید.
-زمان ارسال 3 تا 7 روز کاری
-پس از خرید محصولات دانلودی و آموزشی به صفحه ی پروفایل قسمت دانلود ها مراجعه و فایلهای خود را دانلود کنید.
-زمان ارسال 3 تا 7 روز کاری
گارانتی اصالت و سلامت فیزیکی کالا
موجود در انبار
262.700تومان
توضیحات بیشتر
ماژول محافظ شارژ باتری لیتیومی 6 سل 12A یک برد محافظ با عملکرد بالا برای باتریهای لیتیومی 6 سلولی است که از آسیبهای ناشی از شارژ و دشارژ بیش از حد محافظت میکند. این ماژول از ویژگیهایی چون حفاظت در برابر شارژ بیش از حد، دشارژ بیش از حد و اتصال کوتاه برخوردار است و میتواند تا 12 آمپر جریان را تحمل کند. این برد برای کاربردهای مختلف شامل باتریهای ذخیره انرژی، پروژههای خورشیدی، و سیستمهای UPS مناسب است.
مشخصات فنی ماژول محافظ شارژ باتری لیتیومی 6 سل 12A
ولتاژ کاری: 25.2V-26V
حداکثر جریان عملیاتی: 12A (توجه به دفع حرارت)
حداکثر جریان لحظهای: 20A
جریان بالانس: 156mA
ولتاژ شارژ بیش از حد: 4.25V ± 0.05V
ولتاژ دشارژ بیش از حد: 2.7V ± 0.05V
جریان بیصدا: کمتر از 30uA
حفاظت در برابر اتصال کوتاه: قابلیت حفاظت و بازسازی خودکار با تأخیر
ابعاد برد: 34×53.5x3mm
نکات مهم استفاده از ماژول محافظ شارژ باتری لیتیومی 6 سل 12A
از ترکیب باتریهای خوب و بد خودداری کنید!
هرچه ظرفیت/مقاومت داخلی باتریها به هم نزدیکتر باشد، عملکرد بهتری خواهد داشت!
تأثیر استفاده از یک باتری بد برابر با تأثیر استفاده از 6 باتری بد است.
برای محصولات دشارژ بالای 3A، نرخ دشارژ باتری باید حداقل 3C باشد.
برای باتری با نرخ 1C و ظرفیت 2000 میلیآمپر، برابر با 2A جریان کاری است.
برای باتری با نرخ 3C و ظرفیت 2000 میلیآمپر، برابر با 6A جریان کاری است.
باتری در حین استفاده گرم میشود که به معنای نامناسب بودن نرخ باتری است. در این صورت، نباید برای مدت طولانی استفاده شود زیرا باتری به سرعت خراب میشود.
کاربردهای ماژول محافظ شارژ باتری لیتیومی 6 سل 12A
استفاده در سیستمهای ذخیره انرژی خورشیدی
حفاظت از باتریهای 6 سلولی لیتیومی
استفاده در پروژههای UPS و ذخیرهسازی انرژی
کاربرد در سیستمهای انرژیپایه
Specifications of 6S Lithium Battery Charging Protection Board -25.2V 15A
Upper limit operating current: 12A (pay attention to heat dissipation)
Upper limit instantaneous current: 20A
Balance current: 156mA
Overcharge voltage range: 4.25V ± 0.05V
Over-discharge voltage range: 2.7V ± 0.05V
Quiet current:<30uA
Charging voltage: 25. 2V-26V
Short circuit protection: capable of protection, delayed self-recovery
Board size: 34_53. 5_3mm
Attention
Don't mix good batteries with bad batteries!
The closer the battery capacity/internal resistance is, the better!
The usage effect of one bad battery = the usage effect of 6 bad batteries
For discharge products with a current of more than 3A, the battery discharge rate must be 3C and above.
Ratio calculation formula:
For a battery with a rate of 1C, the capacity of 2000 is equal to 2AH1=2A working current.
3C rate battery, 2000 capacity is equal to 2AH3=6A working current.
The battery will heat up during use, which means the battery rate is not suitable. In this case, it cannot be used for a long time, and the battery will be damaged quickly.
Precautions using 6S Lithium Battery Charging Protection Board -25.2V 12A
Lithium battery protection board can not be used for lithium iron phosphate battery, xenon lamp, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, baby car battery, 550 or more power motor, 1W fisheye LED lamp, Customers who purchase in the above combination should pay attention to the following products: the massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, and other products.
For discharge products above 3A, the discharge rate of the battery should be more than 3C. Magnification formula: 1C rate battery, 2000 capacity equals 2AH*1=2A working current, 3C rate battery, 2000 capacity equals 2A*3=6A working current. In use, the battery will heat up or the battery rate is not applicable. The battery will be damaged quickly after long-term use.
After connecting the line, you need to charge first to have output.
When connecting 6 sets of batteries in series, please ensure that the voltage of each set of batteries is the same. If they are different, please fill each set of batteries separately and use them in series. During the discharge test, the battery with the fastest voltage drop is the poor battery.
Do not mix good battery and poor battery! The closer the internal resistance of the 6-cell battery is, the better! (The effect of 4 good batteries + 2 poor batteries = the effect of 6 poor batteries)
دیدگاهها افزودن نظر
شما هم میتوانید در مورد این کالا نظر دهید.
اگر این محصول را قبلا خریده باشید، دیدگاه شما به عنوان خریدار ثبت خواهد شد. همچنین در صورت تمایل میتوانید به صورت ناشناس دیدگاه خود را ثبت کنید.
ماژول محافظ شارژ باتری لیتیومی 6 سل 12A
گارانتی اصالت و سلامت فیزیکی کالا
موجود در انبار
262.700تومان