این محصول فاقد باتری بوده و باتری مناسب آن A27 می باشد. 
نحوه راه اندازی:
دکمه ی روی برد را یک بار فشار بدهید تا چراغ روی برد روشن شود.سپس دکمه روی ریموت را فشار بدهید تا چراغ روی برد چشمک بزند.ریموت با ماژول Pare می شود و کار میکند.برای تغییر مود ریموت نیز دکمه روی برد را دوبار فشار بدهید تا چراغ روی برد روشن شود.سپس دکمه روی ریموت را فشار بدهید تا چراغ روی برد چشمک بزند.برای پاک کردن ریموت نیز دکمه روی برد را سه بارفشار بدهید تا چراغ روی برد روشن شود.سپس دکمه روی ریموت را فشار بدهید تا چراغ روی برد چشمک بزند.
It is a learning code wireless remote control switch, whose output / working way can be changed as you like, and it is easy to match the transmitter. It has a small volume, stable and reliable performance, and high receive sensitivity.
Features:
1. This remote control switch is designed to control a wide variety of electronic devices with a wireless signal.2. It covers application areas from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security, etc.3. Extremely easy to set up and use.4. Radio frequency identification technology.5. It has a small volume, stable and reliable performance, and high receive sensitivity.
Wireless digital identification technology, each switch has independent passwords, do not interfere with each other.Wireless RF remote control, no direction, the signal can pass through walls.No need for wiring can save wire costs, saving time and effort.Provide passive switch: NO is normally open port, COM is a common port, equivalent to on and off, and when the relay is energized, NO and COM are connected.
Specification:
Receiver:
Operating voltage: DC 12V
Operating frequency: 315MHz
Receiver sensitivity: On;Press again->Off (Need 1 channel switch and 1 remote control button.)
Press one button for working/ ON. Press the same button again for stopping/ OFF.
2). Inter-Lock Mode: Press->On;Press another button ->Off (Need 1 channel switch and 2 remote control buttons.)
Press one button for working/ ON, press another button for stopping/ OFF.
3). Jog Mode: Press and hold->On;Release->Off (Need 1 channel switch and 1 remote control button.)
Keep pressing one button for working/ ON. Remove your finger for stopping/ OFF.